The headers are used for harvesting soy bean, spiked cereals, grain legumes, cereal crops and provide minimum losses of seed on soy bean harvesting. Regarding structural components the headers are maximally unified with grain headers which are series-produced at holding. The difference between them is that soy bean headers have adaptable cutter bar, which follows field contour and provides the height of cut from 30 to 50 mm full-width.
For harvesting cultures, for which low cut is not needed, there is an opportunity to turn off cutter bar copying by fixing it on the header frame. So that to reduce ground pressure header shoes has an enlarged surface. Header dividers are made the tightest possible. Right side frame is equipped with cover for impact reduction on stalks during the harvesting and for reducing seed drop.
|Model of grain harvester||GS-5|
|GS -812||GS -10Ðš|
|Maximal operating speed|
|- on grain harvesting||km/h||8||8||8||8|
|- on soybean harvesting||km/h||7||7||7||7|
|Minimal height of cut||mm||30||30||30||30|
|Overall losses, not more than||%||3||3||3||3|
|Inequality of cutting height, not more than||%||20||20||20||20|
|Overall dimensions in operating position:|
|Weight of header||kg||1950||1950||2200||2200|