Translate en


2 Years
6.0/7.0/9.2 m
12 Kg/Sec
9.0 Cum
Grain Tank
330 Hp
Engine Power

Combine harvester PALESSE GS12A-1 is a further development of the popular grain harvester GS12 at a higher engineering level with improved design.

List of changes made to the design of the harvester GS12A-1 compared to the harvester GS12:

There was changed the construction of feed elevator, installed a dust extraction, also were used conveyor chains and installed 4-row belt drive. This way we increased reliability of technical process and guaranteed the comfort of machine operator (reduction of dust level in front of the grain header).

Grain bunker volume was extended to 9 m3, which increases an output per shift of the harvester.

A platform vibrator was installed in the grain bunker, that provides safety unloading of high humidity grain and elimination of arch formation.

Strengthened shaking board and suspension links increase reliability of technical process while harvesting wheat and corn of high humidity.

There were used side hybrid-plastic machine hoods.

There were some changes made in the cabin, so it became even more comfortable.

There were installed decorative plastic fence on straw walker hood.

There were changed headlamps, bumper and masks on a cab subframe.

As an option, with Mercedes engine can be used following components: multifunction jack “Faster” (connecting the grain header with thresher), hydrostatics “Sauer Danfoss” and other hydraulic components of worldwide known producers.

As an option, on the combine harvester it is possible to install the air filter of increased dust holding capacity "MANN-HUMMEL", Germany, to extend the time between maintenance.

Grain harvesting combine PALESSE GS12A-1conforms the best analogues of the world manufacturers with it`s operating process parameters. At the same time the working cost of harvesting is several-fold lower due to low purchase price and owning cost.

Engine model JaMZ-238DE-22, JaMZ-238DE2-27,
DTA530E, DTA570E
Nominal engine powerkW243, 240, 235
Nominal engine powerh.p.330, 326, 320
Threshing drum widthmm1500
Threshing drum diameter
- firstmm600 (pre-accelerator) 
- second mm800 (threshing drum) 
Frequency of threshing drum rotationsrpm440-875
Type of straw shaker  5 keys
Separation area, not less than m26,15
Total sieve area, not less thanm25,0
Total separation area of concave, not less thanm22,39
Separation three stage 
with blow of each stage
Grain tank
Grain tank type transformable,
with automatic signaling of filling and forced unloading 
Grain tank volume, not less thanm39,0
Loading height of unloading auger, not less thanmm4000
Length of boom of unloading auger, not less thanmm3300
Control of unloading auger  electro hydraulic control from operators seat 
Angle of unloading auger turning, not less thandegree101
Throughput on grain mass, not less thankg/s12
Capturing width of header m6,0; 7,0; 9,2
Capturing width of pick-upm3,4
Fuel tank volume l600
Overall dimensions and weight 
Dimensions of standard set (self-propelled thresher, grain header with 7 meters capturing width) in operating position, up to: 
- lengthmm11200
- widthmm7600
- heightmm4650
Weight of standard set (without transport truck)kg16600
Devise for rapeseed harvesting. Capturing widthm6,0; 7,0
Kits with header for corn harvesting. Number of harvested rowspcs6; 8
Header for sunflower harvesting. Number of harvested rows pcs8; 12
Header for soybean harvesting. Capturing  width m6,0; 7,0
Frequency of separator fan rotationrpm318-960
Road clearance, not less thanmm330
Reducerof drum speed